Ruckus Wireless ZoneFlex 2925, User Manual

Page: 44 / 67

Ruckus Wireless ZoneFlex 2925/2942 User Guide | Managing the Access Point
40
Changing the Wireless Data Rate
1
After opening the Web User interface, click Wireless under Configuration.
2
When the Configure::Wireless::Common workspace appears, click Edit Common Set-
tings .
3
When the Configure::Wireless::Advanced::Common workspace appears, review the
options.
4
Open the Data Rate menu and make a selection. (The default value is Best .)
5
Select the preferred rate of data transmission from the drop-down menu.
• Selecting Best allows the AP to adapt data transmission to the best rate available.
• Note: the efficacy of rates listed in the Data Rate drop-down menu is dependent on
the Wireless Mode previously specified.
6
Click Update Settings to save and apply the changes.
Changing the Transmit Power Setting
1
After opening the Web User interface, click Wireless under Configuration.
2
When the Configuration::Wireless::Common workspace appears, click Edit Common
Settings .
3
When the Configure::Wireless::Advanced::Common workspace appears, review the
available options.
4
Open the Transmit Power menu and make a selection. (The default is Full .)
5
Select the level of transmit power from the drop-down menu. This option sets the
maximum transmit power level relative to the calibrated power.
6
Click Update Settings to save and apply the changes.
FIGURE 4-3
FIGURE 4-4