RTS Digital Matrix Intercom RVON-8, User Manual

Page: 75 / 80

73
What is the difference between File|Open and File|Load?
What is the difference between File|Open and File|Load?
While primarily the same, there are distinct differences between File|Open and File|Load .
File|Open
• If the application is connected to a device when File|Open is performed, it automatically disconnects when the
file is opened.
• If a catalog device is currently selected when the File|Open is performed, RVONedit will disconnect (if
connected) from the current device and read the file.
• If the file that is opened is for a different device, RVONedit will switch to the new device in the catalog. If the
new device is not in the catalog, it will create the device with the file parameters.
After a file has been opened, you can view/modify the configuration settings. You can save the changes to the existing file or
create a new setup file by performing a File|Save. You can also connect to the device and Send the changes to the device.
File|Load
• The application is not disconnected from the current device (if connected).
• The setup file may contain information for a device other than the device you are currently viewing. RVONedit
will not switch to the new device.
• The items in the setup file are overlaid on the current device and marked as changed when they are read.
After a file has been loaded, you can modify the file before you sent it to the device using the Send Changes command.
NOTE : Partial loads and partial saves are not supported in RVONedit. This means that all information in a setup file that can
be loaded will be loaded.