RTS Digital Matrix Intercom RVON-8, User Manual

Page: 22 / 80

Screen Descriptions
20
NOTE : A Coding Algorithm is an algorithm used to compress audio. There are five (5) codices supported by Telex: G.711ms
law, G.711A law, G.729AB, G.723 (5.3k) and G.723 (6.3k). The type of coding algorithm you choose will dictate the
quality of audio you hear and the network bandwidth used. The packet size determines how much audio data is
carried across the network in each transmitted packet. The CODEC type and packet size chosen require different
amounts of bandwidth from the network. As with the coding algorithm, the packet size you choose for the audio
transfer will affect the audio you hear and the bandwidth you use over the network. The larger the audio packet you
choose to use, the lower the bandwidth used. However, the larger packet size can result in higher delay and longer
gaps if the packet is lost. On the other hand, smaller packet sizes result in larger bandwidth use, but lower delays and
smaller gaps if the packet is lost. The Intercom System Engineer and the Network Administrator may want to work
together in choosing the coding algorithm and packet size suitable for the size of the network, so degradation of
network resources does not occur.
Channel Status
The Channel Status displays read-only status information on the channel’s connection and communication status.
NOTE : If you are connected to a device with ‘Write’ or ‘Admin’ privileges, a context menu is available that allows you to
Clear Connection Statistics for all channels (right-click in the left title column) or Clear Connection Statistics for
Individual Channels (right-click in the channel column).
Keypanel Polling ID Displays the keypanel polling ID for the channel.
1.
From the drop down list, select the keypanel polling ID (choose from 1 to 10 , or select
the dash to assign no polling ID).
NOTE : This field is only used with the RVON-I/O in remote mode.
Keypanel Polling Baud
Rate Displays the keypanel polling baud rate for the channel.
1.
From the drop down list, select the keypanel polling baud rate .
The option for this field are 9600 or 76.8 kbps .
NOTE : This field is only used with the RVON-I/O in remote mode.