RTS Digital Matrix Intercom RVON-8, User Manual

Page: 12 / 80

Screen Descriptions
10
NOTE : All of the above fields, except Description, require ‘Admin’ privileges to modify. Changing the IP Address, Netmask,
or Gateway will cause the device to reboot when the changes are sent.
Pass-Through and/or GPI/O Information
Use the Pass-Through and/or GPI/O Information section to configure the pass-through GPI/O settings for an RVON device
(if applicable).
Using the Expand/Collapse button , you can collapse or expand each section of the Device Configuration and Status
section. When collapsed, only the section heading appears.
UNDER STATUS
Type Displays the type of RVON device being configured and what mode it is running in (if
applicable).
Status Displays the current status of the RVON device and the current access rights of the user.
Sessions Displays the number of RVONedit sessions the device supports and how many are available (for
example, 15/16 Available).
Channels Displays the VoIP connection states for each channel (green = connected, red = disconnected,
gray = not configured).
Keypanels Displays the keypanel connection states for each channel (green = connected, red = disconnected,
gray = not configured).
UNDER SERIAL
TO ETHERNET The Serial to Ethernet information shows the serial data that is received on the serial connection
and transferred to the Ethernet address of the device to which the serial data is sent.
Tx IP Address Displays the IP Address of the device the serial data is sent.