manualshive.com logo in svg

Royal Alpha 710ML, User Manual

Share
Download
Royal Alpha 710ML User Manual Download Page 98

Chapter 9    Maintenance and Options

91

Alpha 710ML  User’s Guide

To install or replace the batteries

1

Before you start, make sure you have 3 new AA batteries. 

1

Open the Journal Compartment Cover. Remove 
the Journal Compartment Cover and set aside. 

2

Move the paper roller bar up and out of the way. 
Grab the small handle on the right of the print 
roller bar. Push the little handle towards the back 
of the cash register and raise the paper roller bar 
up. You see a slope down to the paper 
compartment. The battery cover is located under the print roller bar, on 
the slope. 

3

Remove the battery cover. Press the edge at the 
top of the cover and push to the back. The cover 
pops off. 

• Put the batteries in the slots. Make sure that 

the positive and negative ends are in the right 
place. The batteries have a little plus (positive) 
and minus (negative) sign on each end to help 
you. 

• Replace the battery cover. Slide the bottom tabs into the long slit in the 

bottom position and snap the cover into place. Do not put the tabs in 
the 2 holes in the bottom of the compartment. The cover will not close 
and you will break the tabs. 

About the Serial Port

Your cash register includes a serial 
port on the right side of the cash 
register. You can connect items to the 
cash register using this serial port. You 
can only connect one device to the 
serial port at a time. 

To use the optional barcode reader, you must connect it to the serial port. 
You can also use the serial port to connect the cash register to a PC and 
use the RegisterLink software. 

To connect your computer to the serial port, you need a null-modem serial 
cable. A 6 foot null modem serial cable is included in the box with the 
cash register. 

Summary of Contents for Alpha 710ML







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands