Royal Alpha 710ML User Manual Download Page 70

Page: 70 / 134

Chapter 6 Ringing up Sales and Using Training Mode

Alpha 710ML User’s Guide

Ringing up Sales without a PLU Number

You can ring up a sale for an item that does not have a PLU number.

To ring up a straight cash sale without a PLU number

Make sure Sales Registration is highlighted on the main menu and press
the

Amount Tend Total <enter>

key.

If the clerk numbers are set, do the following:

• Enter the clerk number and then press the

Amount Tend Total

<enter>

key.

• Using the round Number keys, press the three digit passcode and then

press the

Check

key.

Using the round Number keys area, enter the price of the first item.

Press the

Department

key for that item.

To use the Department keys from 17 to 32, do the following:

• Press the

Dept Shift

key and press the department number you want to

use.

To use department numbers from 33 to 200, do the following:

• Press the

Dept Shift

key.

• Using the round Number keys, type the Department number from 33

to 200 that you want to use. For example, for Department 63, press the

key and then press the

key.

• Press the

Dept Shift

key again.

Repeat for the rest of the items.

When you are done ringing up items, press the

Amount Tend Total

<enter>

key. The cash drawer opens and the receipt or journal prints.

Make any change needed and place the money you are given in the cash
drawer. Close the cash drawer.

Give the customer the receipt, if the cash register is set to print receipts.
You are ready to ring up another sale.

Summary of Contents for Alpha 710ML







































































































































Search results

Summary of Contents for Alpha 710ML

Reviews:

Brands by name

Popular brands

Royal Alpha 710ML, User Manual

Search results

Summary of Contents for Alpha 710ML

Reviews:

Brands by name

Popular brands