Royal Alpha 710ML User Manual Download

Page: 123 / 134

Alpha 710ML User’s Guide

116

Voiding a PLU Sale with a Minus Percentage Discount

Voiding a PLU Sale with a Minus Percentage Discount

Example 40:

Assume PLU #1 is preset for the price of $1.00 in Department 1

and the

-%/RA

key is preprogrammed for 10%. Void a sale with PLU #1 and a

10% discount.

To void a PLU sale with a minus percentage discount

Press the

key, in the Number keys area, press

, and then press the

key.

Press

the

key.

If the Minus Percentage Discount is not pre-programmed, type the

discount rate before pressing the

key.

Press the

key.

Voiding a PLU Sale with a Plus Percentage Rate

Example 41:

Assume PLU #1 is preset for the price of $1.00 in Department 1

and the

+%/PO

key is pre-programmed for 10%. Void a sale for PLU #1 and add

a 10% add-on amount.

To void a PLU sale with a plus percentage rate

Press the

key, in the Number keys area, press

, and then press the

key.

Press the

key.

If the Plus Percentage Rate is not pre-programmed, type in the discount
rate before pressing the

key.

Press the

key.

Summary of Contents for Alpha 710ML







































































































































Search results

Summary of Contents for Alpha 710ML

Reviews:

Related manuals for Alpha 710ML

Brands by name

Popular brands

Royal Alpha 710ML, User Manual

Search results

Summary of Contents for Alpha 710ML

Reviews:

Related manuals for Alpha 710ML

Brands by name

Popular brands