Royal Alpha 710ML User Manual Download

Page: 36 / 134

Chapter 4 Setting Up Your Cash Register - the Basics

Alpha 710ML User’s Guide

Select On. Press the

Amount Tend Total <Enter>

key. Now when the

clerk enters Sales Registration mode, s/he is prompted for the clerk
number.

To turn on Clerk Passcodes

Programming

Security Set Up

Clerk Passcode

Press the press the

Main menu (on)

key.

Press the

Arrow Down

key to select Programming. Press the

Amount

Tend Total <Enter>

key.

If you are prompted for a Manager Passcode, type the passcode number
and then press the

Check

key. If you did not program a Manager

Passcode, go to the next step.

Press the

Arrow Down

key to select Security Set Up. Press the

Amount

Tend Total <Enter>

key.

Press the

Arrow Down

key to select Clerk Passcode. Press the

Amount

Tend Total <Enter>

key.

Select On. Press the

Amount Tend Total <Enter>

key. Now when the

clerk enters Sales Registration mode, s/he is prompted for the clerk
number and passcode.

Using the Clerk System

If the clerk security system is active, the clerk is prompted to enter the
clerk number and passcode when they enter the Sales Registration mode.

To use the clerk system

Make sure Sales Registration is highlighted on the main menu and press
the

Amount Tend Total <enter>

key.

Using the round Number keys, enter the clerk number and then press
the

Amount Tend Total <enter>

key.

If prompted for a passcode, use the round Number keys and press the
three digit passcode. Then press the

Check

key.

To use clerk numbers (example)

Example 1:

Clerk #1 has a passcode of 234

At the main menu, select Sales Registration and press the

Amount Tend

Total <Enter>

key.

Using the round Number keys, press

, then press the

Amount Tend

Total <Enter>

key.

Press

234

and then press the

Check

key.

Summary of Contents for Alpha 710ML







































































































































Search results

Summary of Contents for Alpha 710ML

Reviews:

Related manuals for Alpha 710ML

Brands by name

Popular brands

Royal Alpha 710ML, User Manual

Search results

Summary of Contents for Alpha 710ML

Reviews:

Related manuals for Alpha 710ML

Brands by name

Popular brands