manualshive.com logo in svg

Royal Alpha 710ML, User Manual

Share
Download
Royal Alpha 710ML User Manual Download Page 103

Alpha 710ML  User’s Guide

96

 The Cash Register Does Not Work at All

• Enter a price, press a department key, and press the 

Amount Tend Total 

<Enter>

 key to end the sale. Now continue with what you were trying to 

do. 

The Cash Register Does Not Work at All

1

Be sure the cash register is plugged into a working electrical outlet and 
no other electrical device is using the same power source. Another 
electrical motor on the same circuit can keep the cash register from 
working properly.

• If error still persists, perform a Half System Clear procedure. See Half 

System Clear.

• If the Half System Clear did not work, perform a Partial Reset. See 

Partial Reset. 

• As a last resort, perform a Full System Clear procedure. See Full 

System Clear.

2

If needed, contact the Royal Customer Support hotline at 
1-800-272-6229 for additional help.

Opening the Drawer When There is no Power

If there is no power and you need to open the drawer, follow these 
instructions. 

1

With your hands on the cash 
drawer, carefully tip the 
front of the register up. 
Underneath the cash 
register, toward the back of 
the register, you see a small 
lever. 

2

Push the lever in the only 
direction it will move. The 
cash drawer opens. 

Half System Clear

If you cannot get the cash register to respond, try a half system clear. 

To do a half system clear

1

Unplug the cash register from the power source. 

2

Wait 30 seconds. 

3

Plug the cash register in again.

4

Continue with normal operations.

Summary of Contents for Alpha 710ML







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands