Royal Alpha 710ML User Manual Download | Manualshive

Page: 97 / 134

background image

Alpha 710ML User’s Guide

90

Using the Battery System

5

Do one of the following:

• If you do not need to print receipts:

Place the black plastic Journal Takeup spindle
on its grooves above the Battery
compartment. The spindle sits above the
paper roll. Press the

Feed

key to move the

paper through the printer about 10-12 inches.
Push the paper through one of the narrow
openings in the center of the Journal Takeup
spindle. Press the

Feed

key until the paper

catches and begins to wind securely around
the Journal Takeup spindle. Replace the
Journal Compartment Cover.

• If you want to print receipts: Lay the customer receipt paper over the

receipt slot and close the Journal Compartment Cover.

Using the Battery System

Your cash register has a memory where information about your
programming and transactions are stored. This memory stores the
information that lets you print reports, such as the total sales for the day,
week, or month. The cash register memory also stores information about
any special programming you have done.

If your cash register is unplugged or if there is a power outage, the
batteries keep the information in the memory until you plug the cash
register into a power source or the power is restored.

To make sure the battery back-up protection is working, replace the
batteries at least once a year. To help you remember, consider replacing
the batteries on New Years Day. The cash register can be off or unplugged
for as long as 700 hours (about 28 days) and the information in the
memory is still there when you are ready to use the register again.

If there was a power outage, replace the batteries as soon as there is power
again.

DO NOT

remove or replace the batteries until you plug the cash

register into a power source and you see messages on the display.

If you will not use the cash register for an extended period of time, you
can remove the batteries to prolong their life. However, all information in
the cash register will be erased if you do this.

Caution

You must plug the cash register in before installing or replacing the back-up
batteries. All data is erased when you remove the batteries if the cash
register is not plugged in before you remove the batteries.

«
...
95
96
97
98
99
...
»

Summary of Contents for Alpha 710ML







































































































































Reviews:

No comments

Related manuals for Alpha 710ML

Brand: Royal Sovereign Pages: 12

Brand: Ingenico Pages: 2

Brand: Hach Ultra Pages: 42

Brand: VAKI Pages: 42

Brand: Met One Instruments Pages: 20

Brand: DG logek Pages: 90

Brand: Puloon Pages: 17

Brand: Puloon Pages: 141

Brand: Festo Pneumatic Pages: 6

Brand: CET Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands