manualshive.com logo in svg

Royal Alpha 710ML, User Manual

Share
Download
Royal Alpha 710ML User Manual Download Page 100

Alpha 710ML  User’s Guide

Troubleshooting

Most errors are described on the clerk screen and you are prompted with 
the corrective action to take. For a list of common error messages and 
what they mean, see Error Codes on page 45. This section generally 
describes other possible issues and what to do. Select and follow the 
procedure which best describes what is happening.

Paper End or Printer Errors

Both prompts means there is a paper problem. 

Caution

Do not manually pull the receipt paper.

 Always use the 

Feed

 key to 

remove or advance the paper. Do not use sharp or pointed instruments in 
the printer area. This can seriously damage the printer. 

1

Check if you are out of paper. If so, replace with a new roll. 

2

Check for a paper jam. If so, carefully remove any paper obstructing the 
printer. 

3

Check and make sure the paper was aligned properly in the printer and 
that the printer bar is snapped into place. 

4

After the paper jam is successfully removed, press the 

Clear

 key. If an 

error message still appears, unplug the cash register, wait 10 seconds, and 
plug it back in. 

5

If there is a FUNCTION error and an error message still appears on the 
display, press the 

Clear

 key.

6

As a last resort, follow the directions for a Full System Clear. See Full 
System Clear on page 97.

C

HAPTER

10

Summary of Contents for Alpha 710ML







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands