Rowe Scan 600-20, Operating Manual

Page: 74 / 140

75
The following settings can be made:
Language : Select the desired language of the texts in ScanManager.
Speed : Select automatic and reduced feed speed (to protect sensitive originals).
The height of the reduced speed can be set in ConfigManager (see Chapter 6.8).
Backlight : Enhanced presentation of extremely dark originals.
Prescan mode : Determine behavior when pressing the Prescan button:
 Normal prescan : Prescan is effected with the selected settings. The preview
then corresponds to the result obtained when pressing the Start button.

Fast prescan : A fast prescan with reduced resolution is effected. Using the
mouse, you can afterwards highlight an area which you want to scan with
the selected settings. In general, this option is reasonable only if you want
to scan a special area of the original.
Runout : Select where and how the scanner shall output the original after the
scan: back (eject), back hold, front (eject), front hold, hold .
High Performance Mode: When enabling this mode, in the Scan to File mode
creation of the output file is already started before completion of the scan
process by starting a scan with the green button
Start (or in Batchscan mode) so
that throughput is increased thereby.
Direct writing of the output file during scanning is possible under certain
conditions only and depends upon the selected settings. If, for example,
rotation is enabled (see 5.10), output can be started only after completion of
the scan. If the settings are selected in a way that direct output is not
possible, output is started automatically only after completion of scan. Direct
output is possible only if the following requirements are met:
 Either JPEG or TIFF are selected as file format.

The resolution is not 2400TURBO.
 Mirroring, rotating, inverting, and automatic alignment must be
deactivated.
 All margins are set to 0.
 Scaling (zoom) is 100 %, i.e. no scaling is effected (not to a
format either).
 No Multiprint output is effected.
Load favorite "Standard" automatically after n minutes : Period in minutes after
which the favorite "Standard" shall be loaded automatically. Previous settings get
lost if they were not saved in a favorite (0: automatic loading deactivated).