Rowe Scan 600-20, Operating Manual

Page: 63 / 140

64
If you start output with a Multiprint favorite
being activated, a dialog box pops up after
pressing the start key where you can check /
set on which output devices to output:
1. Activate / deactivate output on
device
: Enable the field if you want to
output on the indicated device
otherwise remove the check mark by
clicking.
2. Number of copies : For output on a
printer you can enter the number of
copies in this text box before starting
if more than one copy is needed.
Here, the name of the printer is also
shown. For
Scan to File the target
folder appears.
3. Start : By pressing the Start button,
the operation is started.
Figure 5.42: Multiprint output
5.13 Job List
The function "Print jobs" of ScanManager serves the management of print jobs created by
ScanManager. The general structure of the job list is shown in Figure 5.43.