Rotwild R.C750 2020, Owner'S Manual, Page: 68 / 71

69
Recommended tightening torques
The tightening torque depends on the material
and diameter of the bolt and on the material
and design of the component.
NOTICE
If a torque figure is printed or embossed
on the component, use this torque figure.
If you have no experience of using a torque
wrench, have any loose bolts tightened by
your ROTWILD authorised dealer.
Torque table Tyre pressure table
Guidelines for shock air pressure
Description or bolt size Tightening
torque (Nm)
Handlebar clamp 5-6 Nm
Steering tube clamp 5-6 Nm
Bolt (stem) at one’s own
discretion
(no play in
headset)
Bolt (joint) 8 Nm
Bolt (brake and dérailleur systems) 7-8 Nm
Bolt (seat post) 5-6 Nm
Bolt (saddle) 6-8 Nm
Pedal cranks, bolt behind cover 30-35 Nm
Pedals 30 Nm
Front wheel nut 20-25 Nm
Rear wheel nut 25-30 Nm
Bolt (brake pads) 3-4 Nm
Bolt (shock) 8 Nm
Bolt (rear axle) 12 Nm
Bolt (drive battery pre-tensioning
device) 5 Nm
Model Recommended tyre pressure and size
RC750HT20 2-2.5 bar / 29-36 psi; 60-622
RC75020 2-2.5 bar / 29-36 psi; 60-622
RX750HT20 2-2.5 bar / 29-36 psi; 65-584
2-2.5 bar / 29-36 psi; 60-622
RX75020 2-2.5 bar / 29-36 psi; 65-584
2-2.5 bar / 29-36 psi; 60-622
RE75020 2-2.5 bar / 29-36 psi; 65-584
2-2.5 bar / 29-36 psi; 60-622
RT75020 2-2.5 bar / 29-36 psi; 50-622
Rider’s weight
[kg] RC75020 RX75020 RE75020
140 mm 150 mm 160 mm
< 57 180 psi 185 psi 185 psi
57-61 190 psi 190 psi 195 psi
61-66 195 psi 205 psi 205 psi
66-70 200 psi 215 psi 215 psi
70-77 210 psi 225 psi 225 psi
77-84 220 psi 235 psi 235 psi
84-91 230 psi 250 psi 245 psi
91-98 240 psi 260 psi 255 psi
List of tables