Rotwild R.C750 2020, Owner'S Manual, Page: 17 / 71

18
The display of the Marquardt Remote 4311
operating system is on the left of the handlebars
when you are sitting on the bike. Please check
the parts list for your model to see which type
of display it is fitted with.
Display screen
Fig. 6: Overview of the fields on the display.
Description of the functions
The operating system has two buttons, a rocker
switch and a joystick. The functions are as
follows:
On/off button (1)
The button located in the e-MTB’s direction of
travel is used to switch it on and off. If the bike is
not being used for several minutes, the system
switches off automatically to save energy.
Rocker switch ( ︿ / ﹀ ) (2)
The rocker switch is used to select the different
levels of support.
If you press the top half of the rocker arm (
︿
),
you increase the level of support.
To reduce the level of support, you press the
bottom half of the rocker arm (
﹀
).
Joystick (3)
By pushing the joystick to the right or left, you can
toggle the display between the speed, remaining
range, power in watts, TOUR menu, TOTAL menu
and general settings.
By pushing the joystick downwards, you can
display additional information in the TOUR menu
and the TOTAL menu and under general settings.
Light button (4)
When you press the light button, the light symbol
appears on the display and the e-MTB lights
are switched on, if your bike has this option.
Pushing aid mode
You switch on pushing aid mode by pressing and
holding the top half of the rocker arm (
︿
) .
WARNING
Using pushing aid mode.
You must steer the
e-MTB using both hands in the pushing aid
mode.
Please note that because of the design of the
bike, the pedals may turn, so you should leave
enough space for them to move. The power and
speed of pushing aid mode can be adjusted
by selecting a different gear.
Marquardt Remote 4311 operating system