Rotwild R.C750 2020, Owner'S Manual, Page: 30 / 71

31
NOTICE
A crash can prevent your e-MTB from functioning
correctly and can also cause damage. After
a crash you may not be able to use your bike
again immediately. For this reason, you should
carry out the following checks.
Wheels and tyres
Check your wheels. They must be held firmly in
position in the wheel mounts by the quick release
lever or the bolts and must be in the centre of the
front wheel fork and the rear triangle. They must
turn freely and run true. Check your tyres and,
in particular, the carcass for damage.
CAUTION
Risk of injury!
If you do not have the necessary
technical knowledge or do not carry out the check
correctly, you could be injured.
- Wear protective gloves.
- Keep your fingers away from moving parts
and make sure they do not get trapped.
Fig. 12: Front wheel and tyre.
Fig. 13: Rear wheel and tyre.
Handlebars and stem
Check the handlebars and stem for damage and
cracks. Make sure that the handlebar and stem
cannot be turned in opposite directions. If the
components can be turned in opposite directions,
tighten the bolts with a torque wrench (see the
section “Recommended tightening torques” on
page 69).
Fig. 14: Handlebars and stem
Frame
Check the frame for cracks and deformation.
If the frame is cracked or deformed, contact
your ROTWILD authorised dealer.
What to check after a crash