Rotwild R.C750 2020, Owner'S Manual, Page: 16 / 71

17
The display of the Remote 14d operating system
is on the left of the handlebars when you are
sitting on the bike. Please check the parts list for
your model to see which type of display it is fitted
with.
Display screen
Fig. 5: Overview of the fields on the display.
Description of the functions
The operating system has three buttons and
a rocker switch. The functions are as follows:
On/off button (1)
The button located in the e-MTB’s direction of
travel is used to switch it on and off. If the bike
is not being used for several minutes, the system
switches off automatically to save energy.
Light button (2)
When you press the light button, the background
lighting in the display and the e-MTB lights are
switched on, if your bike has this option.
Set button (3)
By pressing the set button you can toggle the
display between total kilometres (T), trip counter
(TRP) and remaining range (R).
If you press and hold the set button, the system
switches between metric and imperial units.
Rocker switch (+/-)
The rocker switch is used to select the different
levels of support. If you press the top half of the
display (+), you increase the level of support.
To reduce the level of support, you press the
bottom half (-).
By pressing and holding the bottom half of the
display
(-) , you reset the trip counter (TRP).
Pushing aid mode
You switch on the pushing aid mode by pressing
and holding the top half of the display (+).
WARNING
Using pushing aid mode.
You must steer the
e-MTB using both hands in the pushing aid
mode.
Please note that because of the design of the
bike, the pedals may turn, so you should leave
enough space for them to move. The power and
speed of pushing aid mode can be adjusted
by selecting a different gear.
Remote 14d operating system