76
8.0 EH Pro and SI Pro Screens
The settings for EH Pro and SI Pro have been collated into one section because of the similarities
present during configuration of each type of actuator. This means that some settings shown in this
manual may not be visible for your specific actuator.
8.1 Basic Settings
8.1.1 Valve Tag
8.1.2 Close Action
8.1.3 Open Action
8.1.4 Close Pressure (Limit) (%)
8.1.5 Close Pressure (Mid) (%)
8.1.6 Open Pressure (Limit) (%)
8.1.7 Open Pressure (Mid) (%)
8.1.8 Closed Limit
8.1.9 Open Limit
8.2 Contact Relays
8.2.1 Contact – Function
8.2.2 Contact – Value
8.2.3 Contact – Form
8.3 General Settings
8.3.1 Remote Select
8.3.2 Configure Local Controls
8.3.3 Low Power Mode
8.3.4 Closed LED Colour
8.4 Digital Control
8.4.1 Remote Priority
8.4.2 Hold Position
8.4.3 Position Hysteresis
8.4.4 Over Pressure Hysteresis
8.4.5 Under Pressure Hysteresis
8.5 ESD/Partial Stroke
8.5.1 ESD
8.5.2 Partial Stroke
8.5.3 Reference Partial Stroke Test Recorded Values
8.6 Analogue Control
8.6.1 Analogue Control
8.6.2 Flow Characterisation
Summary of Contents for Insight 2
Page 1: ......
