Ross LDP-8242, User Manual, Page: 84 / 100

3–50 • Operating Instructions LDP-8242 User Manual (Iss. 03)
(continued)
Save/Delete Protect Button Locks and unlocks editing of presets to prevent accidental overwrite as
follows:
• Unprotected : Allows preset Save and Delete buttons to save or
delete current card settings to the selected preset. Use this setting
when writing or editing a preset .
• Protected : Toggle to this setting to lock down all presets from being
inadvertently re-saved or deleted. Use this setting when all
presets are as intended .
Note : When toggling between button modes, make sure to wait for the
card Settings status indicator to turn green before moving on.
Event-based loading allows a defined preset to be automatically engaged
upon various received signal statuses.
Event Preset Load Select Separate drop-downs for SD, and HD input signal acquisition states allow
going to a selected preset upon input acquisition state.
Note : No Preset setting should be considered and used for any
input state that is not specifically to be used for a valid GPI state.
Go-to number settings are independent of saved presets and
cannot be defined under a preset.
•
•
Event-based loading is particularly useful in providing automated card setup when transitioning from normal processing to
processing supporting an alternate format (as shown in the example here when transitioning from network HD to local/legacy
SD)
As described in this manual, card control settings are set up
for expected input formats and saved to presets on the
Presets sub-tab (in this example, normal HD settings and an
alternate SD setting where analog audio is embedded).
With the event-based loading set as shown here, the presets
saved above are invoked upon receiving an HD or SD input