Ross LDP-8242, User Manual, Page: 70 / 100

3–36 • Operating Instructions LDP-8242 User Manual (Iss. 03)
(continued)
Note : Default factory preset routing routes bus channels Bus Ch 1 thru Bus Ch 16 to embedded outputs Emb Ch 1 thru Emb Ch
16. Emb Ch1 thru Emb Ch 16 controls are identical to those shown here for Emb Ch 1.
Embedded Output Channel Source Select With the Emb Audio Out sub-tab selected, using the Source drop-down
list selects the card audio source to be directed to the corresponding
embedded output channel from the choices described below.
Bus Ch 1 thru Ch 16 as Source for
Embedded Channel Output
Bus Ch 1 thru Bus Ch 16 range in Source drop-down list routes a card
internal bus channel (Bus Ch 1 thru Bus Ch 16) to be the source for the
selected embedded output channel.
(In this example, Bus Ch 1 is the source for destination Embedded output
Ch 1).
Upmixer Channels as Source for
Embedded Channel Output
Upmix L thru Upmix Rs range in Source drop-down list routes an upmixed
channel to be the source for the selected embedded output channel.
(In this example, Upmix L is the source for destination Embedded output
Ch 1).
Note : This menu option is only available with the UM-8242 licensed
feature.
Loudness-Processed Channels as Source
for Embedded Channel Output
LP51 L thru LP51 Rs (5.1-channel loudness processor processed
channels L thru Rs) range in Source drop-down list routes a
loudness-processed channel to be the source for the selected embedded
output channel.
(In this example, loudness-processed channel LP51 L is the source for
destination Embedded output Ch 1)
Note : Where stereo loudness processor is available, drop-down
selections for these channels are LP2 L and LP2 R.
Tone as Source for Embedded Channel
Output
Tone 1 thru Tone 8 range in Source drop-down list routes one of eight
tones to be the source for the selected embedded output channel.
(In this example, Tone 1 is the source for destination Embedded output
Ch 1)
•
•
•
•
•
•
•
•