Ross LDP-8242, User Manual, Page: 69 / 100

LDP-8242 User Manual (Iss. 03) Operating Instructions • 3–35
Output Audio Routing/Controls
Provides controls to route card audio from card processing paths to
16-channel embedded audio destinations external of the card. Use the
Embed Audio Out sub-tab to access embedded output routing.
The card internal bus, Audio DSP outputs, and
the Dolby encoder output pair are available as
sources for the card embedded audio outputs.
The example here shows various Source
routing selections (using the Emb Audio Out
sub-tab) that direct upmix outputs L thru Rs to
Embedded outputs Ch 1 thru Ch 6, the
pre-upmix Bus Ch1 and Ch 2 sources to
Embedded outputs Ch 7 and Ch 8, (unused
embedded channels can be set to Silence or
Mute).
Each bus channel provides Gain, Mute, and a
peak level display.
The source-to-destination correlation shown
here is only an example; any of the digital audio
output destinations described on the following
pages can receive inputs from any of the
internal bus, or DSP sources.