Ross LDP-8242, User Manual, Page: 68 / 100

3–34 • Operating Instructions LDP-8242 User Manual (Iss. 03)
(continued)
Note : Flex Mix input channels Flex Mix 2 thru Flex Mix 16 have controls identical to that described here for Flex Mix 1. Therefore,
only the Flex Mix 1 controls are shown here.
For each Flex Mix input channel, its source should be considered and appropriately set. Unused input channels should be set to
the Silence selection.
Flex Mix Input Channel Source Using the Source drop-down list, selects the audio input source to be
directed to the corresponding bus channel from the choices listed below.
• Silence
• Embed Ch 1 thru Embed Ch 16
• AES Ch 1 thru AES Ch 16
Gain / Mute Control Provides relative gain (in dB) control and a channel Mute checkbox.
(-80 to +20 dB range in 0.1 dB steps; unity = 0.0 dB)
Flex Mix Summing Node (Bus) Selector Each Flex Mix input channel can be fed as desired to any of 16 summing
node buses (Flex Mix A thru Flex Mix P). The flex mix buses can be
routed and processed the same as any other audio input source.
Note : See the examples on the previous page for providing various types
of mixers by applying a common Flex Mix Bus to various input channels.