manualshive.com logo in svg

Ross LDP-8242, User Manual, Page: 7 / 100

Share
Download
Ross LDP-8242 User Manual Download Page 7

LDP-8242 User Manual (Iss. 03)

Contents • i

Contents

Introduction

1

Overview.............................................................................................................................. 1-2

Features.................................................................................................................. 1-2
Video/Audio Signal Types .................................................................................... 1-3
Video and Audio Options...................................................................................... 1-3
Control and Data Inputs/Outputs........................................................................... 1-3
Supported Audio and Video Formats .................................................................... 1-4

Manual Overview ................................................................................................................ 1-5

Card Software Versions and this Manual.............................................................. 1-5

Functional Block Diagram................................................................................................... 1-6
Video Subsystem Overview................................................................................................. 1-7

Video Processor..................................................................................................... 1-7
Frame Sync Function............................................................................................. 1-7
Timecode Processor............................................................................................... 1-7
Closed Captioning Processor................................................................................. 1-8

Audio Subsection Overview ................................................................................................ 1-9

Audio Processing Overview .................................................................................. 1-9
Audio Input Routing/Mixing Function................................................................ 1-10
Audio Output Routing Function.......................................................................... 1-12
Upmixer Licensed Feature (UMA-8242) ............................................................ 1-12
Loudness Processor ............................................................................................. 1-13
Tone Generators .................................................................................................. 1-14

Control and Data Input/Output Interfaces ......................................................................... 1-15

Rear Modules....................................................................................................... 1-15
GPI Interface ....................................................................................................... 1-15
Serial (COMM) Ports .......................................................................................... 1-15

User Control Interface ....................................................................................................... 1-16

DashBoard™ User Interface ............................................................................... 1-16

Documentation Terms and Conventions............................................................................ 1-17

Warnings, Cautions, and Notes ........................................................................... 1-17

Installation

2

Before You Begin ................................................................................................................ 2-2

Static Discharge..................................................................................................... 2-2
Unpacking.............................................................................................................. 2-2

Installing a Rear Module...................................................................................................... 2-3

Installing a Rear Module ....................................................................................... 2-3

Installing a Card................................................................................................................... 2-4

Installing the LDP-8242 ........................................................................................ 2-4

Cabling for the LDP-8242 ................................................................................................... 2-5

Cabling Overview.................................................................................................. 2-5

Setting up Network Remote Control ................................................................................... 2-8

Operating Instructions

3

Control and Display Descriptions........................................................................................ 3-2

Summary of Contents for LDP-8242





































































































Reviews:

No comments