background image

3

Battery & Charging

• 

Always keep the area around the Charging Station obstacle-free.

• 

Fully charge the battery to prevent over-discharge due to non-use before storing.

• 

Charge in a clean and dry indoor environment.

• 

Cover the LaserEye to protect it from dust. Do not store in a dusty environment as, with all electronic devices, 
dust may cause damage over time.

• 

Do not use an adapter with a damaged cord or plug. 

• 

If storing for more than 1 month, remove the battery and store separately.

• 

If the battery is stored, place it back in the LaserEye and recharge it once a month.

• 

If the charging port or any part of the adapter is damp or obstructed, do not use it.

• 

If you misplace your adapter and/or Charging Station, visit www.rollibot.com for a replacement.

• 

It is recommended that you fully charge the battery before using the LaserEye for the fi rst time. Batteries 
perform best after several full charge/discharge cycles.

• 

Please ensure the adapter is fully inserted and/or connected to the wall outlet before charging. Improper 
insertion may result in electric shock, short circuiting, smoke, or fi re.

• 

Refer any non-routine battery maintenance to RolliBot.

• 

Regularly wipe the front charging contact of the charging base to ensure proper charging. 

• 

LaserEye may not be used with any type of power converter.

• 

Store the LaserEye indoors at a dry and stable temperature. Do not store in an unheated garage, shed, or other 
location with extreme temperature fl uctuations.

• 

Use only the battery included in the original packaging or received from RolliBot as a replacement.

• 

Use only the adapter included in the original packaging or received from RolliBot as a replacement. 

1.2 Disposal at End-of-Life

This product must not be disposed of by incineration, landfi lling, or mixing with household 

trash. Improper disposal of the battery contained within this product may result in the battery 

heating up, rupturing, or igniting which may cause serious injury. The substances contained 

inside the battery present chemical risks to the environment. The recommended disposal for 

any RolliBot LaserEye at its end-of-life is to dispose of the entire unit at or through an e-Waste 

recycling center, program, or facility. Local regulations and laws pertaining to the recycling and 

disposal of lithium ion batteries and/or products containing them will vary according to country, 

state, and local governments. You must check laws and regulations corresponding to where 

you live in order to properly dispose of the battery and/or unit. It is the user’s responsibility to 

dispose of their waste equipment properly with accordance with local regulations and laws.
For additional information about where you should drop off  your batteries and electrical 

or electronic waste, please contact your local or regional waste-management offi  ce, your 

household waste disposal service, or your point-of-sale.

Summary of Contents for LASEREYE





















Reviews: