rollibot LASEREYE, User Manual

Page: 13 / 20

10
7.1 Maintaining the Dustbin
Necessary dustbin maintenance includes emptying the dustbin itself and cleaning out the fi lters.
It is recommended that you empty the dustbin after the fi rst few cleaning cycles especially if the
LaserEye was able to clean hard to reach areas. After this, clean out the dustbin after every 3-4
cleaning cycles. For dustbin and additional maintenance, see the images and instructions in the
upcoming sections.
7.1.1 Removing & Cleaning the Dustbin
Step 1:
Press the bin clip down and carefully pull the dustbin out to remove it.
Step 2:
Press and hold the button down to release the motor. It should pop out.
Step 3:
Press the buttons on both sides of the dustbin to open the front then lift the front lid up.
Step 4:
Empty the contents into a waste bin and use the cleaning brush to gently clear away any
remaining debris. Then, close the front lid. It will click into place.
Step 5:
The dustbin can be cleaned with water if desired. Before rinsing, all fi lters must be
removed. See Section 7.1.2. Allow 24 hours time for the dustbin to dry.
Step 6:
After everything is completely clean and dry, reinstall the motor.
Step 7:
Return the dustbin to the LaserEye, making sure it is fully inserted. The dustbin should
be emptied and cleaned after every 3-4 cleaning cycles.
1
2 3
5
6
4
7