10
No.
Name
Explanation
Page
1
USB MEMORY connector
This is for connecting a USB flash drive. You use this when saving or loading settings, or when importing still
images.
2
USB WLAN ADAPTOR connector
Here you connect a wireless USB adapter (sold separately) for making a Wi-Fi connection to an iPad.
You use this when operating the unit remotely using the XS-80H Remote iPad application.
* For the wireless USB adaptor, use the ONKYO UWF-1 or Roland WNA1100-RL.
3
[SWITCHING MODE] button
This switches the operation mode of the cross-point selection buttons (
). Successive presses of the button
cycle through the modes in this sequence: video and audio interlink mode
g
video independent mode
g
audio
independent mode
g
preset mode.
The color of the lighted button indicates the operation mode.
5
Lighted in yellow:
Video and audio interlink mode
5
Lighted in green:
Video independent mode
5
Lighted in red:
Audio independent mode
5
Lighted in blue:
Preset mode
4
Cross-point selection buttons
These function as follows, according to the operation mode selected using the [SWITCHING MODE] button (
).
Operation mode
Functioning of the cross-point selection buttons
Video and audio interlink
mode
These switch the cross points for the video or audio channels. According
to the operation mode, they can switch the video and audio in tandem, or
independently switch only the video or only the audio.
Each button’s horizontal direction is the input channel and vertical direction is
the output channel.
The current selection of audio or video channel is indicated by the color of the
lighted button.
5
Lighted in yellow:
Video channel and audio channel
5
Lighted in green:
Video channel only
5
Lighted in red:
Audio channel only
Video independent mode
Audio independent mode
Preset mode
These function as memory-number selection buttons. These buttons access
preset settings that have been saved.
5
INPUT STATUS indicators
These indicate the type of video signal being input.
5
Lighted in blue:
HDMI signal
5
Lighted in red:
Analog video signal (RGB/component, composite, Y/C)
5
Lighted up in white: Still picture
5
Dark:
No input signal
6
[OFF] buttons
These apply fade to the output video and output a picture of a single color (specifiable). The corresponding [OFF]
button lights up when the video fade-out is complete.
7
AUDIO level meters
These indicate the volume levels on the output channels.
8
Display
These display information about input and output video, menu items, and the like.
Panel Descriptions
Front Panel/Top Panel/Side Panel
XS-84H
1
2
3
4
5
6
7
8
9 10 11 12 13
Summary of Contents for VS-82H
Page 36: ...Appendices 36 Dimensions 372 353 7 481 430 88 Unit mm...
Page 37: ...37 MEMO...
Page 39: ...39 For EU Countries For China...
Page 40: ...5 1 0 0 0 4 2 6 0 6 0 3...
