Panel Descriptions
12
Rear Panel
1
2
3
4
5
6
7 8
9
10
11
XS-84H
No.
Name
Explanation
Page
1
[POWER] (main power) switch
This turns the main power on and off.
When the main power has been turned on, the power button on the front panel can be used to switch
the power to on or standby.
2
AUDIO OUTPUT connectors
These are 5p Euroblock connectors for output of analog audio signals. Recording units, power amps,
speakers, and other devices are connected to these.
* To make connections, use the included Euroblock plugs (p. 13).
3
AUDIO INPUT connectors
These are 5p Euroblock connectors for input of analog audio signals. You connect audio decks,
microphones, and other such devices to these.
* To make connections, use the included Euroblock plugs (p. 13).
* AUDIO INPUT connectors 1 and 2 can supply phantom power (+48 V).
4
Phantom power indicator
This indicator lights up when phantom power (+48 V) is turned on.
5
Analog video INPUT connectors
(RGB/COMPONENT/COMPOSITE/YC
INPUT connectors)
These are D-Sub 15-pin connectors for input of analog video signals. In addition to RGB signals, using
conversion cables lets you input component, composite, and Y/C (S-Video) signals. You connect video
decks, computers, and other such devices to these.
* Inputting video requires setting the type of video signal (RGB/component, composite, or Y/C) for each
input video channel.
6
AC IN connector
This is for connecting the included power cord.
7
RS-232C connector
This is for connecting a remote-control device (such as an RS-232C-compatible computer) for operating
the unit remotely.
8
LAN port
This is for connecting a computer or other network-capable equipment for operating the unit remotely.
9
HDMI OUTPUT connectors
These output HDMI signals. External displays or other devices equipped with HDMI input connectors are
connected to these.
* Simultaneously outputting video from both the HDMI output connector and the HDBaseT output
connector on the same channel is not possible.
HDBaseT OUTPUT connectors
These output HDBaseT signals. Projectors or other devices equipped with HDBaseT input connectors are
connected to these.
* To make connections, use a Cat 5e (Category 5e) or later shielded LAN cable.
10
HDMI INPUT connectors
These are for inputting HDMI signals. Video devices equipped with HDMI output connectors are
connected to these.
* Inputting video requires setting the type of video signal (HDMI) for each input video channel.
11
Cooling-fan exhaust port
This expels internal heat to keep temperatures inside the unit from rising excessively.
NOTE
Never block the cooling-fan exhaust port. Blocking the exhaust port might result in a rise in
temperature inside the unit, resulting in malfunction due to heat.
-
Summary of Contents for VS-82H
Page 36: ...Appendices 36 Dimensions 372 353 7 481 430 88 Unit mm...
Page 37: ...37 MEMO...
Page 39: ...39 For EU Countries For China...
Page 40: ...5 1 0 0 0 4 2 6 0 6 0 3...
