Roland VS-82H, Owner'S Manual

Page: 15 / 40

Connecting External Equipment
15
Ampliers, speakers, recording units, etc.
Video decks, CD players Microphones, audio mixers, etc.
Connecting Audio Source/Output Equipment
Audio input connectors
Audio output connectors
* Connect microphones to the R channel of AUDIO INPUT
connector 1 or 2. For information on how to perform wiring,
refer to “AUDIO INPUT/OUTPUT connectors” (p. 33).
* AUDIO INPUT and OUTPUT connectors are wired as shown in the
figure below. Make connections after first checking the wiring
diagrams of other equipment you intend to connect.
COLD HOT
GND
HOT COLD
L R
5
For information on how to attach cables to the included Euroblock
plugs, refer to “Connecting Cables to the Euroblock Plugs” (p. 13).
5
For information on how to perform wiring, refer to “AUDIO INPUT/
OUTPUT connectors” (p. 33).
* Acoustic feedback could be produced depending on the location of
microphones relative to speakers. This can be remedied by:
5
Changing the orientation of the microphone(s).
5
Relocating microphone(s) at a greater distance from speakers.
5
Lowering volume levels
Using Phantom Power
AUDIO INPUT connectors 1 and 2 (R channel only) can supply
phantom power (+48 V).
When using a condenser microphone that requires phantom power,
turn on phantom power.
[MENU] button
g
“AUDIO INPUT”
g
“ANALOG-1” or “ANALOG-2”
g
set “PHANTOM POWER” to “ON.”
The phantom power indicator next to the connector lights up when
phantom power is turned on.
NOTE
Always turn the phantom power off when connecting any
device other than condenser microphones that require
phantom power. You risk causing damage if you mistakenly
supply phantom power to dynamic microphones, audio
playback devices, or other devices that don’t require such
power. Be sure to check the specifications of any microphone
you intend to use by referring to the manual that came with it.
(This instrument’s phantom power: 48 V DC, 14 mA Max)
XS-84H
R R
Audio output
equipment
Audio source
equipment