Roland VS-82H, Owner'S Manual

Page: 35 / 40

Appendices
35
Audio
Audio processing Sampling rate 24 bits/48 kHz, 8ch
Input Connectors
Digital HDMI Type A (19 pins) x 8
Analog 5-pin euroblock type x 8
Output
Connectors
XS-82H
Digital HDMI Type A (19 pins) x 2
Analog 5-pin euroblock type x 2
XS-83H
Digital HDMI Type A (19 pins) x 3
Analog 5-pin euroblock type x 3
XS-84H
Digital HDMI Type A (19 pins) x 4
Analog 5-pin euroblock type x 4
Input Level and Impedance
Ch1–2
Signal Level -60 to +4 dBu (Maximum: +22 dBu)
Impedance Gain 0 to 23 = 10 k ohms, Gain 2 to 60 = 5 k ohms
Ch3–8
Signal Level +4 dBu (Maximum: +22 dBu)
Impedance 8.5 k ohms
Output Level and
Impedance
Ch1–4
Signal Level +4 dBu (Maximum: +22 dBu)
Impedance 600 ohms
Audio Formats HDMI Linear PCM, 24 bit, 48 kHz, 8 ch
Audio Effects
16 stereo inputs and 4 outputs digital audio mixer
Input High-pass filter, Mono, 4-band parametric equalizer, Compressor/Ducking, Gate
Output 4-band parametric equalizer, Compressor/Gate, Down mix, Lip-sync Delay (1 msec units, max 170 msec)
Other Test tone output, Synchronized/unsynchronized audio and video function
Other function
Preset memory (32), Key lock function.
Other jacks
RS-232C 9 pins D-sub type x 1
LAN
RJ-45 x 1
USB A type x 2 (for USB memories, for WNA1100-RL/ONKYO UWF-1)
Display
Graphic LCD 128 x 64 dots
Others
Power Supply
AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz)
Power
Consumption
XS-82H
55 W/0.5 A (117 V), 55 W/0. 4 A (220 V, 230 V, 240 V)
XS-83H
60 W/0.6 A (117 V), 60 W/0.4 A (220 V, 230 V, 240 V)
XS-84H
70 W/0.6 A (117 V), 70 W/0.5 A (220 V, 230 V, 240 V)
Dimensions
481(W) x 353(D) x 88(H) mm
18-15/16 (W) x 13-15/16 (D) x 3-1/2 (H) inches * EIA-2U rack mountable
Weight
6.0 kg
13 lbs 4 oz
Operation Temperature
+0 to +40 degrees Celsius
+32 to +104 degrees Fahrenheit
Accessories Power Cord, Euroblock Plug x 12, Rubber Foot x 5, Owner’s Manual
* 0 dBu=0.775 Vrms
* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
* This product is intended for use in the following Electromagnetic environments:
E1: residential, E2:commercial and light industrial, E3:urban outdoors, E4:controlled EMC environment, ex. recording studio (broadcasting studio) which are specified in
EN55103-1 and EN55103-2.