Roland VS-300, Service Notes

Page: 238 / 295

4-40
4
6
7
From the test pattern, find the value where the print line
matches the cut line.
In this case, the correction value for the scan direction is
"- 0.3".
<TEST PATTERN>
Correction-value scale
Cut line
5
Select [PRINT-CUT ADJ.]>[TEST PRINT], and press [ENTER]
key.
The test print and cut will be performed.
Three marks are printed at the left-end, right-end and the
center of the media, and each mark is cut. Con
fi rm the cut
line positions on the marks visually.
Broken line is indicating the cut line
PRINT-CUT ADJ.
TEST PRINT
CUTTING MENU
PRINT-CUT ADJ.
[ ]
[ ]
.0 - .0
.0 - .0
0. -0.
0.0 -0.0
. - .
Scan
.0
- .0
.0
- .0
0.
-0.
0.0
-0.0
.
- .
Feed
-0.
[ ]
CUTTING MENU
PRINT-CUT ADJ.
F:+0.30 +0.30mm
S:+-0.40 -0.40mm
PRINT-CUT ADJ.
SETTING
[ ]
[ ]
[ ]
If it is dif fi cult to see the cut line visually, use a mag-
ni fi er.
F: Feed direction S: Scan direction
Left: Current value Right: New value
(Setting range: +/-5.00mm In 0.01mm unit)
key : Value of F, t
key : Value of F, towards -
key : Value of S, t
key : Value of S, towards -
ENTER key : Saves new setting
MENU key : Moves out SETTING menu
Select [CUTTING MENU]>[PRINT-CUT ADJ.]>[SETTING],
and enter the correction-values found in the test pattern for
both Feed and Scan.
If it is dif fi cult to see the cut line visually, use a mag-
ni fi er.