3-54
13
16
14
+
ON
15
Connect the motor cable to the connector.
Fix the Right Frame and the Panel Cover.
Right Frame
Panel Board
When fixing the Panel
Cover, fi x the sensor with
the sensor cable and the
ribbon cable to the Panel
Board.
Move the Head Carriage by hand to the lock position.
Turn on the Main Power SW, and then turn on the Sub Power
SW while pressing the left, right and down keys to enter the
Service Mode.
Summary of Contents for VS-300
Page 49: ...2 4 MAIN BOARD_Arrangement Diagram Soldering Side ...
Page 60: ...2 15 SERVO BOARD_Arrangement Diagram Soldering Side ...
Page 65: ...2 20 2 4 CARRIAGE BOARD CARRIAGE BOARD_Arrangement Diagram Component Side ...
Page 68: ...2 23 2 5 SUB BOARD SUB BOARD_Arrangement Diagram Component Side ...