Roland SP-404MK, Reference Manual

Page: 74 / 204

Editing a Sample (SAMPLE EDIT)
>
Organizing the Samples
Copying the Sample from a Pad
Hereʼs how to copy the sample thatʼs assigned to a pad to a different pad.
Copying all samples in a bank to another bank
This is how to copy all the samples in a bank to another bank.
Press the [COPY] button.
The COPY PAD screen appears.
1
Press the pads in order, beginning with the pad you want to copy (sample), and then the copy destination
pad.
If you decide to cancel copying, press the [EXIT] button.
You can use the bank [A/F]‒[E/J] buttons to select a bank before pressing the pads. Itʼs also possible
to copy samples between different banks.
You may notice a difference in volume when copying samples between different banks, due to the
differences in the BANK VOLUME parameters set for each bank.
2
Press the [VALUE] knob or [COPY] button.
The padʼs sample is copied.
Performing this operation overwrites (erases) the sample in the copy destination pad.
3
Hold down the [COPY] button and press the [EXIT] button.
The COPY BANK PAD screen appears. 1
Press the bank [A/F]‒[E/J] buttons to select the bank to copy (source). 2
Turn the [VALUE] knob clockwise to move the cursor.
3
Press the bank [A/F]‒[E/J] buttons to select where to copy the bank (destination). 4
Press the [VALUE] knob.
All the samples in the bank are copied to the specified bank.
Performing this operation overwrites (erases) the sample in the copy destination pad.
5