>
Adding a Count-in Before Sampling
This feature adds a count-in before sampling begins. This gives you time to get ready to play before sampling actually
begins.
Hold down the [SHIFT] button and press the pad [10].
The value changes in order each time you press pad [10] while holding down the [SHIFT] button.
Edit the count-in setting.
Value
Explanation
COUNTIN
1MEAS
Adds a one-measure count-in before sampling.
COUNTIN
2MEAS
Adds a two-measure count-in before sampling.
COUNTIN
WAIT
When the input audio signal exceeds the level set in the Auto Trig Level parameter,
sampling begins.
COUNTIN
OFF
No count-in is used. Sampling starts immediately after you press the pads [1]‒[16] to
sample and then press the [REC] button.
1
Summary of Contents for SP-404MK
