Roland SP-404MK, Reference Manual

Page: 146 / 204

MIDI
Parameter Value Explanation
MIDI Sync Specifies the tempo source.
Auto The tempo automatically synchronizes to the MIDI clocks if MIDI clocks are input via the
MIDI IN connector or the USB port.
Internal The tempo specified on this unit is used.
MIDI The tempo synchronizes to the MIDI clocks received via the MIDI IN connector.
USB The tempo synchronizes to the MIDI clocks received via the USB port.
MIDI Sync
Out OFF,
ON When this is ON, clocks, start and stop are transmitted to the device connected to this
unitʼs MIDI OUT connector.
Soft
Through OFF,
ON If this is ON, MIDI messages that are inputted to the MIDI IN connector are re-
transmitted without change from the MIDI OUT connector.
USB-MIDI
Thru OFF,
ON When this is ON, MIDI signals that are inputted via the USB port are outputted to the
MIDI OUT connector. MIDI signals that are inputted via the MIDI IN connector are also
outputted to the USB port.
The inputted MIDI signals are also transmitted to the internal sound module at the
same time.
GAIN
Parameter Value Explanation
Attenuator OFF, ON When this is ON, the gain of the audio input from the LINE IN jacks is
lowered.
Turn the Attenuator on when the LINE IN input seems to be distorting.
Noise Gate Reduces the noise floor in the signal input from the LINE IN and INPUT jacks.
OFF The noise gate is not used.
-9dB, -12dB,
-18dB Reduces the noise floor at the specified level.