Roland SP-404MK, Reference Manual

Page: 42 / 204

Using the Effects
Adding Effects to a Sample (BUS FX)
You can use the various effects built into the SP-404MKⅡ to process the playback audio in unique ways.
You can assign the effects you like to the effect buttons.
For details, refer to “ Assigning the Desired Effect to an Effect Button (DIRECT FX) .”
Press the effect buttons.
Press the buttons of the effects you want to apply, including the [DRIVE] button, the
[RESONATOR] button, the [DELAY] button, the [ISOLATOR] button, the [DJFX LOOPER] button, and the
[MFX] button.
This turns the effects on.
1
Press pads [1]‒[16] to play back the samples.
Effects are applied to the samples.
2
Use the [CTRL 1]‒[CTRL 3] knobs to adjust the parameters.
The parameters change how the effects are applied.
You can also access the effect sub-parameters by holding down the [VALUE] knob and operating the
knobs.
3