50
9 Software Guide
Double-click any tool from 1 to 4 to display the lower
level.
Click [Material], then click the composition of the engraving
material (workpiece).
Double-click [Color] to display the lower level.
Click the color to set, then click the tool number.
If you don’t wish to engrave lines of that color, click
[None].
Double-click on the tool number to display the lower
level.
Click [Tool Down Position] and enter the cutting in depth.
For [Fill], click [Tool Width], then enter the diameter of the
tool tip.
MODELA 3D DESIGN
This lets you choose a basic shape such as a cylinder or sphere, and modify it to create a three-dimensional object.
You can intuitively create solid objects with smooth curves.
Choose the basic shape
Click
.
The [Primitives] dialog box appears.
For items other than [Tool Down Position] and [Fill] - [Tool Width], suitable values are set for engraving the com-
position you chose in step 1. However, these values are only suggestions. If the results of actual engraving are not
as expected, adjust the values accordingly.
