NC Code Specifications
Chapter 4 Appendix
64
Items Related to the Mechanical Specifications
This section describes the NC codes that are dependent on the machine's mechanical specifications.
"NC Code Reference Manual."
Dimension Word
Of the four dimension words—X, Y, Z, and A—only X, Y, and Z are supported.
Data Settings (G10)
The ranges of the G10 parameters are as follows.
Parameter: Number
Function: Compensation number
Acceptable range: 1 to 8
Valid range: 1 to 8
Parameter: Radius
Function: Cutter diameter compensation value
Acceptable range: Range 1
Valid range: 0 to 10 mm (0 to 0.3937 inches)
Cutter Diameter Compensation (G41, G42)
The ranges of the G41 and G42 parameters are as follows.
Parameter: Number
Function: Compensation number
Acceptable range: 0 to 8
Valid range: 0 to 8
Feed Rate (F)
The range of the F parameter is as follows.
Parameter: Feed rate
Function: Feed rate
Acceptable range: Range 1
Valid range:
X and Y axes: 6 to 240 mm/min (0.24 to 9.45 inches/min)
Z axis: 6 to 180 mm/min (0.24 to 7.09 inches/min)
Summary of Contents for iModela iM-01
Page 73: ...R2 111104 DOC 0943 ...
