Chapter 2 Cutting
Before Starting Cutting
17
Affix the cutting material to the table.
Mount the cutting material so that it does not extend from the table.
After you have affixed the cutting material, check that the cutting material cannot be easily moved from
its position.
P. 14, “Range Where the Cutting Material Can Be Mounted”
Return the unit to its original state.
Raise the main unit back into place, fix it in place with the hooks, and then close the front, rear, and side
covers.
Cutting Requiring a Scrap Plate
There is a need to place a scrap plate when the cutting data contains the process to make a hole in
the cutting material. The thickness of the scrap plate is decided according to depth of the hole.
If the scrap plate does not have the sufficient thickness, not only the table might be scraped, broken,
or damaged, but also the cutting tool might be broken and it might cause injury.
Hook
Push here.
Summary of Contents for iModela iM-01
Page 73: ...R2 111104 DOC 0943 ...
