Chapter 2 Cutting
Starting Cutting
25
Click
.
* After cutting is finished, be sure to perform maintenance of the cutting tool.
P. 40 "Maintenance of the Cutting Tool"
Changing the Order of the Listed Output Files
If you select an output file in the output file list and then click
and
, you can change the
order that the file is output in. Output files are output in the order that they are displayed, starting
with the first file in the list.
Deleting Cutting Data from the Output File List
To delete an output file from the output file list, select the output file that you want to delete, and
then click [Delete]. If you click [Delete All], all the files in the list will be deleted.
Dragging Cutting Data to the Output File List
You can also add cutting data to the list by dragging output files to the windows that are displayed
in step
.
Select this check box to pause
cutting after a single file is output.
This can be used when the output file is in NC
code.
P. 31, "Testing Output of an NC Code Files"
If the output file is in NC code, the contents of
the file are displayed here. This enables you to
check the contents of the file.
Summary of Contents for iModela iM-01
Page 73: ...R2 111104 DOC 0943 ...
