Roland iModela iM-01 Master Manual Download

Page: 22 / 73

Chapter 2 Cutting

Starting Cutting

Set the XY origin.



Move the cutting tool to the loca-

tion that you want to set as the

XY origin.



P. 7, "Operation of the Spindle Unit"

If the setting position is difficult to see,
remove the top cover for better vis-
ibility.



Click [X/Y] under Set Origin Point.

Set the X and Y origins to display “X 0.00 mm” and
“Y 0.00 mm”.

Starting Cutting (for output from iModela Creator)

Procedure



Start iModela Creator.

On the taskbar, click [Start]

(

), [All Programs], [iModela Creator], then [iModela Creator].



Creating the output file.

For information on how to use iModela Creator such as a drawing method, refer to Help of iModela
Creator.



P. 3, "Viewing the Documentation for the Softwares"



Setting the cutting origin.



P. 18, "Setting the Cutting Origin"

Push here and de-

tach the top cover

Top cover

Summary of Contents for iModela iM-01










































































Search results

Summary of Contents for iModela iM-01

Reviews:

Related manuals for iModela iM-01

Brands by name

Popular brands

Roland iModela iM-01, Master Manual

Search results

Summary of Contents for iModela iM-01

Reviews:

Related manuals for iModela iM-01

Brands by name

Popular brands