11
Names of Things and What They Do
16.
PATCH/VALUE Dial
Use this when switching patches and changing the
values of settings.
17.
PARAMETER Buttons
Press to select parameters.
* To jump to the main parameters, hold down one of these
buttons while you press the other. With items for which there
aren’t that many parameters, the GT-8 jumps to the last (or
initial) parameter.
18.
OUTPUT SELECT Button
Allows you to select an output appropriate for the
connected device.
19.
EXIT Button
Use this to undo operations.
20.
WRITE Button
Press to store settings.
21.
SYSTEM Button
Use for making settings for the GT-8’s overall operating
environment.
22.
FX CHAIN (Effect Chain) Button
Use for setting the effect chain (p. 20).
23.
NAME Button
Use for naming patches (p. 21).
24.
TUNER/BYPASS Button
Press to use the tuner and bypass functions.
25.
ASSIGN
CTL/EXP (Control/Expression) Button
Use for setting the CTL pedal and EXP pedal (p. 56).
VARIABLE Button
Use for setting the Assign Variable (p. 57).
26.
MANUAL Button
Press to use the GT-8 in Manual mode.
27.
BANK Pedals
These switch the bank number.
28.
Number Pedals
These switch the patch numbers.
29.
CTL (Control) Pedal
Any one of a number of different functions can be
assigned to this pedal, then be controlled by it. For
example, you could use it to switch the tuner on and
off.
30.
Expression Pedal
Controls volume, wah, and many other parameters.
When you operate the expression pedal, please be
careful not to get your fingers pinched between the
movable part and the panel. In households with small
children, an adult should provide supervision until the
child is capable of following all the rules essential for
the safe operation of the unit.
31.
EXP PEDAL SW (EXP Pedal Switch)
Firmly press down at the front of the pedal to switch
the effect on and off.
32.
EXP PEDAL SW ON/OFF Indicator
Lights when the effect being controlled with the
Expression Pedal Switch is on, and goes out when the
effect is turned off.
GT-8_e.book 11 ページ ２００７年６月２９日 金曜日 午後３時５５分
