46
Chapter 4 Introduction to Effects and Parameters
2CE (2 x 2 Chorus)
Two separate stereo chorus units are used for the low-
frequency and high-frequency ranges in order to create a
more natural chorus sound.
AR (Auto Riff)
This allows you to automatically produce a phrase simply by
picking a single note. This can be used to easily play
extremely rapid phrases.
* Because of the need to analyze the pitch, chords (two or more
sounds played simultaneously) cannot be played.
* Reception of large amounts of MIDI data while Auto Riff is
playing may result in disturbances in the sound.
*1
Setting available with Phrase set to Preset1–30.
Parameter/
Range
Explanation
Xover f (Crossover Frequency)
100 Hz–4.00 kHz
This parameter sets the frequency at which
the frequency components of the direct
sound are divided into bass and treble
bands.
Low Rate
0–100,
BPM
–BPM
Adjust the speed of the chorus effect for the
low frequency range.
* When set to BPM, the value of each parameter will be set according to the
value of the Master BPM (p. 51) specified for each patch. This makes it
easier to achieve effect sound settings that match the tempo of the song
(synchronizing the cycle to one-half or one-fourth of the BPM when the
set cycle rate is increased). When setting to BPM, press PARAMETER
[
] several times to display the Master BPM settings screen.
Low Depth
0–100
Adjust the depth of the chorus effect for the
low frequency range. If you wish to use this
as a doubling effect, use a setting of “0.”
Low Pre Delay
0.0 msec–40.0 msec
Adjust the time from when the low frequen-
cy range direct sound is output until the ef-
fect sound is output.
Extending the pre-delay will produce the sensation of multiple
sounds (doubling effect).
Low Level
0–100
Adjust the volume of the low frequency
range.
High Rate
0–100,
BPM
–BPM
Adjust the speed of the chorus effect for the
high frequency range.
* When set to BPM, the value of each parameter will be set according to the
value of the Master BPM (p. 51) specified for each patch. This makes it
easier to achieve effect sound settings that match the tempo of the song
(synchronizing the cycle to one-half or one-fourth of the BPM when the
set cycle rate is increased). When setting to BPM, press PARAMETER
[
] several times to display the Master BPM settings screen.
High Depth
0–100
Adjust the depth of the chorus effect for the
high frequency range.
If you wish to use this as a doubling effect, use a setting of “0.”
High Pre Delay
0.0 msec–40.0 msec
Adjust the time from when the high fre-
quency range direct sound is output until
the effect sound is output.
Extending the pre-delay will produce the sensation of multiple
sounds (doubling effect).
High Level
0–100
Adjust the volume of the high frequency
range.
Parameter/
Range
Explanation
Phrase
Preset1–Preset30,
User1–User10
Select the phrase.
User-programmed phrases are used when User 1-10 is selected.
Loop
Off, On
If “Loop” is turned “On,” the phrase will be
played back continuously.
Tempo
0–100,
BPM
–BPM
Adjusts the speed of the phrase.
* When set to BPM, the value of each parameter will be set according to
the value of the Master BPM (p. 51) specified for each patch. This makes
it easier to achieve effect sound settings that match the tempo of the
song (synchronizing the cycle to one-half or one-fourth of the BPM
when the set cycle rate is increased).
When setting to BPM, press PARAMETER [
] several times to
display the Master BPM settings screen.
Sens
0–100
Adjust the sensitivity of triggering.
With low settings of this parameter, softly picked notes will not re-
trigger the phrase (i.e., the phrase will continue playing), but strong-
ly picked notes will retrigger the phrase so that it will playback from
the beginning. With high settings of this parameter, the phrase will
be retriggered even by softly picked notes.
No retriggering occurs when the value is set to “0.”
Key *1
C (Am)–B (G#m)
Select the key of the song that you wish to
play.
Attack
0–100
By adding an attack to each note of the
phrase you can produce a sensation as
though the notes were being picked.
Hold
Off, On
If you turn hold “On” after you pick a note,
the effect sound will continue even after
there is no input signal.
Effect Level
0–100
Adjusts the volume of the phrase.
Direct Level
0–100
Adjusts the volume of the direct sound.
GT-8_e.book 46 ページ ２００７年６月２９日 金曜日 午後３時５５分
