52
Chapter 4 Introduction to Effects and Parameters
FX CHAIN (Effect Chain)
Here’s how you can change the order in which the effects are
connected.
1.
Press [FX CHAIN].
The effect chain setting screen appears.
fig.02-140d
* Effects are shown in lowercase letters when turned off.
2.
Use the PATCH/VALUE dial or PARAMETER [
]
[
] to move the cursor to the point where you want
to have an effect inserted.
* DGT: Abbreviation for Digital Out connector
3.
Press the On/Off button for the effect you want to
insert.
The selected effect is inserted at the cursor position.
* Use [MASTER] to set the Noise Suppressor, use ASSIGN
[CTL/EXP] to set the Foot Volume, and use [OUTPUT
SELECT] to set the Digital Out.
4.
If you want to change the sequence further, repeat
Steps 2 and 3.
5.
Press [EXIT] to return to the Play screen.
6.
If you want to save the sequence you’ve set up, use the
Write procedure (p. 22) to save it to a User patch.
* Effects can be switched on and off even while making the
settings for the connection order. With effects appearing to the
left and right of the cursor, the ON/OFF button corresponding
to the effect can be pressed to turn them on/off.
NAME (Patch Name)
Each patch can be given a name (Patch Name) consisting of
up to sixteen characters. You’ll probably want to take
advantage of this feature by assigning names that suggest the
sound you’ll obtain, or the song in which it’ll be used.
1.
Press [NAME].
The patch name edit screen appears.
fig.02-160d
2.
Press PARAMETER [
] [
] to move the cursor to
the text area you want to edit.
3.
Rotate the PATCH/VALUE dial to change the
characters.
You can use the following functions when changing text
characters.
4.
If you want to edit names further, repeat Steps 2 and 3.
5.
Press [EXIT] to return to the Play screen.
6.
If you want to save the sequence you’ve set up, use the
Write procedure (p. 22) to save it to a User patch.
ASSIGN
ASSIGN CTL/EXP
This setting is used for controlling effects with the CTL pedal
and EXP pedal. For more detailed information, refer to
“Setting the Operation of the CTL Pedal, EXP Pedal Switch,
and EXP Pedal (Assign CTL/EXP)” (p. 56).
ASSIGN VARIABLE
This setting is used for controlling multiple effects with the
CTL pedal and EXP pedal or when controlling effects using
MIDI messages or other external messages. For more
detailed information, refer to “Setting the Operation of the
GT-8 and External Controllers (Assign Variable)” (p. 57).
Button
Function
INS
Inserts a blank space at the cursor posi-
tion.
DEL
Deletes the character at the cursor posi-
tion and shifts the characters following it
to the left.
CAPS
Switches the character at the cursor posi-
tion between upper and lower case.
Cursor
GT-8_e.book 52 ページ ２００７年６月２９日 金曜日 午後３時５５分
