64
Chapter 6 Creating Original Effects Types (Customize)
Customizing the Speakers
You can make two different sets of settings, Custom 1 and
Custom 2.
* The sound of any patch that uses Custom 1 or 2 will be altered
if the custom settings are edited.
fig.06-027
1.
Press the PREAMP/SPEAKER [SPEAKER].
2.
Rotate the PATCH/VALUE dial to call up “Custom 1”
or “Custom 2.”
fig.06-030d
3.
Press PARAMETER [
] [
] to show the custom
parameters.
4.
Rotate the PATCH/VALUE dial to change the setting’s
value.
5.
Repeat Steps 3 and 4 as needed.
6.
Press [EXIT] to return to the Play screen.
Preamp High
fig.06-026d
-50–+50
Adjusts the preamp section’s high-frequen-
cy tone.
Parameter/
Range
Explanation
6
2,4
3
1
Parameter/
Range
Explanation
Speaker Size
fig.06-040d
5”–15”
Selects the size of speaker.
Color Low
fig.06-044d
-10–+10
Adjusts the speaker section’s low-frequency
tone.
Color High
fig.06-045d
-10–+10
Adjusts the speaker section’s high-frequen-
cy tone.
Speaker Num (Speaker Number)
fig.06-041d
x1, x2, x4, x8
Sets the number of speakers.
Cabinet
fig.06-042d
Open, Close
Selects the speaker cabinet type.
Open
This is an open-backed cabinet.
Close
This type of cabinet features an enclosed rear panel.
GT-8_e.book 64 ページ ２００７年６月２９日 金曜日 午後３時５５分
