17
2. Milling
Using / Reading the Built-In Panel
Using / Reading the Built-In Panel
ERROR
Flashes when an error has occurred.
PAUSE
Illuminates when operation is paused.
POWER
This lights up when the power is turned on.
CANCEL
Flashes when data is being cancelled and during initialization.
Milling data received while this light is flashing will be cancelled.
Operation button
Pressing this button during milling will pause or restart the machine.
Pressing and holding this button during milling will abort milling or clear some
errors.
Pressing this button in standby will rotate the rotary axis position 180 degrees. The
button will flash during initialization, spindle rotation. The button will illuminate
under any other status while the power is on.
Statuses Indicated by Status Light Color
Blue
The machine is in standby or initializing.
The light will also turn off if no operation is
performed for 30 seconds when in standby,
causing the machine to sleep.
White
When lit white, milling is being performed or
has been paused, or the front cover is open.
Also flashes when the dust collector is in
standby.
Yellow
When lit yellow, an error has occurred, and the
machine has been paused. Check the error
details shown on VPanel. Press the operation
button on the built-in panel to resume milling.
Red
When lit or flashing red, an error has occurred
and milling has been stopped. Milling cannot
be resumed.
Check the error details shown on VPanel. When
lit red, pressing and holding the operation but-
ton on the built-in panel will abort milling and
return the machine to the ready status. When
flashing, turn off the power once and start up
the machine again.
Off
The light turns off when the power is turned
off or the machine in the sleep state.
Status
light
Operation button
Summary of Contents for DWX-51D
Page 64: ...R2 160616 FA01061 ...