Milling Quality Problems
52
4. Troubleshooting
Is the thickness specified in the
CAD data excessively thin?
If the thickness of workpieces is excessively thin,
chipping is likely to occur. Check the shape specified
in the CAD data.
-
Recommended CAD data thickness
Unit:mm
Front tooth
Molar tooth
Veneer
Onlay
Inlay
A Hole Opens in the Milling Results
Do the milling bur diameter and
ATC magazine number match the
CAM settings?
Check the CAM's milling bur settings.
-
Is the machine out of correction?
The origin point may become out of position due to
prolonged use or relocating the machine, which can
affect milling results. Perform automatic correction.
If expected results cannot be obtained even after
performing automatic correction, perform manual
correction. With manual correction, changing the Z
value in the + direction in Origin point may improve
the situation.
Are the milling conditions too
strict?
Strict milling conditions may affect milling results.
Review the CAM milling conditions.
-
1.0 to 1.2
1.5 or higher
1.5 or higher
1.5 or higher 1.0 or higher
1.0 or higher
1.5 or higher
0.8 or higher
1.0 or higher
0.8 or higher
0.6 or higher
0.4 or
higher
0.5 to 1.5
Summary of Contents for DWX-51D
Page 64: ...R2 160616 FA01061 ...