manualshive.com logo in svg

Roland DWX-51D, User Manual, Page: 55 / 64

Share
Download
Roland DWX-51D User Manual Download Page 55

 Installation Trouble

55

4. Troubleshooting

Windows  8.1

When the window shown in the figure appears, click [In

-

stall].

Windows 7

If the window shown in the figure appears, click [Install 

this driver software anyway].

Follow the on-screen instructions to proceed with the installation.

When the installation finishes, click 

 on the setup menu.

Remove the Roland Software Package CD.

Turn on the power to the machine.

Connect the machine to the computer using the USB cable.

 If connecting more than one unit of this machine to a single computer, refer to "Setup Guide" (

 "Connecting Multiple Units")

.

 For the USB cable, use the included cable.

 Do not use a USB hub. Connection may not be possible.

 Secure the USB cable with a cable clamp.

The driver will be installed automatically.

 

Important

Do not bind the power cord 

with the cable clamp. 

Binding the USB cable and 

the power cord may produce 

noise or the like, resulting in 

a malfunction.

Summary of Contents for DWX-51D

































































Reviews:

No comments