Periodic Maintenance
41
3. Maintenance
Care and Storage of Detection Pin and Automatic Correction Jig
For correction, use the detection pin and the automatic correction jig. The presence of rust, scratches, or grime on the de-
tection pin or the automatic correction jig makes accurate detection impossible, which in turn may make it impossible to
perform milling as intended, and may even damage the machine.
Care and Storage
Before use, wipe clean using a dry clean cloth (included with product), and make sure that no dust, rust, or scratches are
found.
Store the detection pin and the automatic correction jig in the storage compartment.
Retightening the Collet
Continuous cutting will cause the collet to become loose, making it easy for the milling bur to come off. Periodically retighten
the collet.
Recommended Interval for Procedure
Once a month, or when the total work time of the spindle exceeds 200 hours (with slight variation depending on the
work situation).
Required Items
• Detection pin
• Spanner
Procedure
Remove any mounted workpiece, pin-type material adapter, or automatic correction jig.
In the top window of VPanel, select the machine
with the collet that will be retightened.
Click the radio button to the left of the name of
the machine
to operate.
Click .
Summary of Contents for DWX-51D
Page 64: ...R2 160616 FA01061 ...