4. Troubleshooting
51
Milling Quality Problems
The Milled Surface is Not Attractive
Is the workpiece firmly secured in
place?
Check the mounting condition of the workpiece.
Fasten the workpiece in place securely so that it will
not slip out of place or come loose because of mill-
ing bur pressure or vibration during milling.
Is the milling bur worn?
If the same milling bur is used for milling for a long
period of time, it will become worn and affect milling
results. Try replacing the milling bur with a new one.
The work time of the milling bur can also be man-
aged in VPanel.
Are the milling conditions too
strict?
Strict milling conditions may affect milling results.
Review the CAM milling conditions.
-
There is a Line of Level Difference in the Milling Results
Is the machine out of correction?
The origin point may become out of position due to
prolonged use or relocating the machine, which can
result in a line of level difference. Perform automatic
correction. If expected results cannot be obtained
even after performing automatic correction, perform
manual correction. With manual correction, changing
the Y value in Origin point may improve the situation.
Are the CAM milling settings cor-
rect?
Depending on the milling conditions, a line of level
difference may occur. Review the CAM milling condi-
tions.
-
Chipping (Edges of Milling Products Become Chipped) Occurs
Is the installation base of the ma-
chine secure?
The vibration from milling can shake the installation
base. Install the machine in a level and stable loca-
tion.
-
Is the workpiece firmly secured in
place?
Check the mounting condition of the workpiece. If
the workpiece is not mounted correctly, it may come
loose during milling and may become misaligned.
Is the milling bur worn?
If the same milling bur is used for milling for a long
period of time, it will become worn and affect milling
results. Try replacing the milling bur with a new one.
The work time of the milling bur can also be man-
aged in VPanel.
Are the milling conditions too
strict?
Strict milling conditions may affect milling results.
Review the CAM milling conditions.
-
Summary of Contents for DWX-51D
Page 64: ...R2 160616 FA01061 ...