52
Make sure the power to the unit is
off before attempting to replace the
separating knife.
Doing so may result in injury.
8-3 How to Replace the Separating Knife
1
Switch off the power to the CX-500/400/300.
If the separating knife, replace it with the replacement knife included with the CX-500/400/300. Follow the steps below to replace
the knife.
3
Replace with a new knife.
2
Remove the separating knife.
(1) Loosen the screw until it slips out.
(2) Grasp the screw portion, and slowly pull it out in
the direction of the arrow.
* Do not pull back while doing this.
4
Install the separating knife.
(1) Grasp the screw portion and slowly insert it into
the groove.
* Take care to ensure that the knife does not slip
(2) Tighten the screw.
Positioning groove
The knife is secured in place
by the magnet.
* If the blade remains in the carriage, use tweezers to remove it.
(2)
(1)
(2)
(1)
Summary of Contents for CX-300
Page 21: ...21 POWER ERROR LED goes out 4 Turn off the power ...
Page 63: ...63 MEMO ...
Page 64: ...R5 020403 ...
